Ultima Competition Series Spécifications télécharger pdf (Page 25)

INSTALLATION INSTRUCTIONS - ULTIMA PERFORMANCE AIR CLEANER

Step 1: Install the head

breather/spacer into the head

using a quality pipe thread sealant

on the 1/2-13 threads. Do not

overtighten.

Step 2: Install carb to

manifold seal onto the

manifold.

Step 3: Install carb into the

manifold. Lightly lubing the seal

beforehand will aid in seating

the carb fully into the manifold.

Leave enrichener facing forward.

Step 4: Install coupling onto the air

filter backing plate after installing

both 3” hose clamps onto the

coupling. Larger I.D. on coupler goes

to the backing plate.

Step 5: Install enrichener knob onto the backing plate. Do

not fully tighten at this time.

Step 6: Install backing plate/coupler onto the carburetor.

Lightly lubing the coupler will aid in fully seating assembly

onto the carb. Do not tighten hose clamps at this time.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Pas de commentaire

Ultima Competition Series Spécifications Page 25